Noise Reduction: How to Remove Background Noise in Audacity?

The most frequent request you’ll get from video makers is to eliminate irritating noises like rumbling or humming from an original clip. Almost all of the time, capturing high-quality audio during filming is challenging since the conversation is often hard to hear or is made unclear due to surrounding noises, such as the dreadful air conditioners or fans.

To get rid of all these awful noises, this Audacity Noise Reduction feature will serve you a significant purpose in removing unwanted background noise for your future videos. Without further ado, let’s get started!

In this article

01 Things You Need to Prepare for Background Noise Reduction

02 How to Remove Background Noise in Audacity?

03 Why is Audacity Noise Reduction Not Working?

04 How to Prevent Background Noise in Audio Recording?

05 How to Remove Background Noise in Filmora?

Part 1: Things You Need to Prepare for Background Noise Reduction

Here are few things that you need to consider before you apply the noise reduction to your clips:

1. Noise Sample

A decent sample of the noise you wish to eliminate is perhaps the most crucial aspect of the Audacity remove noise procedure.

This will be used by Audacity to understand the noise and build a noise profile. The noise recording should last for a fair amount of time and be devoid of any other noises.

2. Avoid Copy Pasting Tiny Noise Section in Your Spoken Phrases

When you have a tiny part of noise between your stated words on your audio, please don’t copy/paste it to make a more significant piece of sound for Audacity to examine.

You would not be supplying Audacity with any more information that will help it generate a decent noise profile. The noise profile is what enables Audacity to tell the difference between speech and noise.

3. Minimum 2048 Data Samples Required

To build a noise profile, the Noise Reduction function requires a minimum of 2048 sample data. An audio file with a sampling frequency of 44.1kHz is roughly five hundredths of a second.

Note that this is the minor sound level that Audacity needs to generate a noise profile; however, should you supply a larger sample of the noise, Audacity can typically perform a great job of producing a suitable noise profile. As a result, attempt to capture a few seconds of background noises wherever possible.

4. Establish Recording Level and Record “Silence”

Setting your audio volume and capturing some “quiet” prior to speaking is the best way to achieve this. Instead, when you’ve finished talking, keep your camera/recorder going for a few moments.

Don’t move or create any sounds while capturing the background noises, and keep an ear open for any other noises. You only need to capture the ambient noise for a few moments; two to five seconds will suffice.

Part 2: How to Remove Background Noise in Audacity on Windows and Mac?

Whether you are using Windows or macOS, we will show you a step-by-step process to achieve your results using both software in this part of Audacity remove background music guide.

Remove background noise in Audacity on Windows

Step 1: On your recording, select a few moments of sound. Any segment of noise that incorporates other noises should be avoided.

Step 2: From the Effect menu, select Noise Reduction.

Step 3: Select the Get Noise Profile option whenever the Noise Reduction effect screen appears.

Note: Choose whether to implement the noise removal to the entire waveforms or only a portion of it.

Step 4: To access the Noise Reduction effects window, go to Effects > Noise Reduction. Raise the level of noise reduction progressively while previewing the result.

Step 5: Head over to the File section to Export and Save the result. Audacity does not save sound clips when you select Save Project; instead, you must choose Export. Select the file type you want to store and the place wherever you can save it. Select Save after giving the File Name.

Remove background noise in Audacity on Mac

Step 1: Create a room tone-containing audio file. When you don’t have a separate track for room tone, use a recording with a few moments of quiet in it. Click-and-drag to select a segment with a few minutes of silence using the Selection Tool.

Step 2: Select Noise Reduction from the Effects tab. Select the Get Noise Profile tab in the new tab under Step 1. The screen will shut, and Audacity will take noise profile samples of the indicated area.

Step 3: Click-and-drag to select the whole file, which requires noise reduction with the Selection Tool. To re-open the function, go to the Effect tab and pick Noise Reduction. Make modifications to the following parameters under Step 2:

• Reduce and Residue
• Frequency Smoothing (bands)
• Sensitivity
• Noise Reduction

Step 4: To listen to how the chosen file will look with the selected parameters, select Preview. Re-adjust until you have a sound noise reduction with no interference. When you’re finished, select Reduce and click OK.

Part 3: Why is Audacity Noise Reduction Not Working?

It’s possible that the Noise Reduction function isn’t letting you mop up your recording since your audio isn’t appropriate for it. The disturbance must be continuous, not random or fluctuating, to work for Audacity’s Noise Reduction function.

For example, the Noise Reduction function will not assist if your audio was made in a busy environment with unique noises such as background chatter, random traffic noises, or in an exhibition space or museum. The Noise Reduction feature in Audacity isn’t meant to cope with that kind of distortion. You’ll need to alter your recording approach if you’re capturing voice in either of those situations.

Under the following situations, the Audacity Noise Reduction function might underperform.

• Particular noise in the background, including traffic or people.
• When the harmonics of the sound and voice are comparable.
• There is sound variance where there is fluctuation in the noise.
• The volume of the voice is comparable to or lower than that of the background noise.
• When the noise is irregular or changeable rather than continuous.
• The loudness is deafening.
• The sound is a single click or pop.

Part 4: How to Prevent Background Noise in Audio Recording?

Although Audacity allows eliminating noise very simply, it is still an additional level that takes time to refine your podcast production. These pointers can help you avoid the necessity for noise reduction and cut down on the amount of time you spend processing.

1. Reduce the Computer Fan Noise

Whenever computers become too heated, they can produce a lot of noise. You may limit the amount of software that runs and position your mic away from the keyboard to help lessen this impact and avoid the fan from coming on.

However, even if you observe all of these guidelines, undesired recording sounds may still appear in your program. Fortunately, contemporary software makes this problem quite simple to resolve.

2. Reduce the Gain and Get Close to the Mic

Reduce the gain (sensitivity of the microphone) and go nearer to it. Talking straight into the microphone won’t distort your audio if you reduce the gain, and that would assist your microphone in concentrating on scooping up your voice’s tone.

Bonus Tip: Set your recorder’s (or DAW’s) sensitivity such that your speech peaks between -12 and -10db.

3. Utilize a Versatile Microphone

Condenser and dynamic microphones are the two most common types of podcast microphones. Condenser microphones are significantly more sensitive instruments meant to take up average atmospheric noise, whereas dynamic microphones have a narrower frequency range, picking up fewer ambient noises.

4. Optimize Your Recording Environment

The most significant and most crucial aspect of your podcasts’ sound quality is where you capture it. To optimize your personal podcasting space, we recommend choosing a peaceful, compact area away from HVAC systems, vehicles, external hard drives, background sound, motors, and other distractions. You may also increase the tone of your room by using natural sound absorbents such as curtains, rugs, carpets, and sofas.

Part 5: How to Remove Background Noise in Filmora?

Although there is a lot of software available to eliminate ambient noise, we highly suggest Wondershare Filmora Video Editor to edit audio and video in one place.

In addition to the standard audio editing capabilities, the recently redesigned Filmora currently includes enhanced waveforms, volume Keyframing , peak metering, and audio transitions, giving you a better audio editing interface.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora Video Editor will quickly remove ambient sound from both sound/video. You may also remove the sound from the video with this simple video editor, use the Audio Equalizer or Audio Mixer functions to modify the audio further, and then Export and save the audio in an Mp3 file. Here are the detailed steps:

Step 1: In the Wondershare Filmora Timeline menu, Import your footage. Trim the footage after previewing it and deleting the sections you don’t want to retain.

Step 2: To eliminate the ambient noise immediately, double-click on the video file, and go to the Audio panel to select the Remove Background Noise option. You will find that the background noise is removed automatically.

Step 3: After checking the results, select Export to download the noise-reduced clip to your desktop or upload it immediately to YouTube or Vimeo.

Conclusion

Well, there you have it. In this Audacity Remove Background Noise guide, we have reviewed every possible method you can adopt to get rid of the unnecessary background noise in the Audacity. And if the desired results are still not achieved, we highly recommend using the Wondershare Filmora editing software. Not only will it help you remove the unwanted ambient noise, but it will also allow you to customize your audio or video file further.

02 How to Remove Background Noise in Audacity?

03 Why is Audacity Noise Reduction Not Working?

04 How to Prevent Background Noise in Audio Recording?

05 How to Remove Background Noise in Filmora?

Part 1: Things You Need to Prepare for Background Noise Reduction

Here are few things that you need to consider before you apply the noise reduction to your clips:

1. Noise Sample

A decent sample of the noise you wish to eliminate is perhaps the most crucial aspect of the Audacity remove noise procedure.

This will be used by Audacity to understand the noise and build a noise profile. The noise recording should last for a fair amount of time and be devoid of any other noises.

2. Avoid Copy Pasting Tiny Noise Section in Your Spoken Phrases

When you have a tiny part of noise between your stated words on your audio, please don’t copy/paste it to make a more significant piece of sound for Audacity to examine.

You would not be supplying Audacity with any more information that will help it generate a decent noise profile. The noise profile is what enables Audacity to tell the difference between speech and noise.

3. Minimum 2048 Data Samples Required

To build a noise profile, the Noise Reduction function requires a minimum of 2048 sample data. An audio file with a sampling frequency of 44.1kHz is roughly five hundredths of a second.

Note that this is the minor sound level that Audacity needs to generate a noise profile; however, should you supply a larger sample of the noise, Audacity can typically perform a great job of producing a suitable noise profile. As a result, attempt to capture a few seconds of background noises wherever possible.

4. Establish Recording Level and Record “Silence”

Setting your audio volume and capturing some “quiet” prior to speaking is the best way to achieve this. Instead, when you’ve finished talking, keep your camera/recorder going for a few moments.

Don’t move or create any sounds while capturing the background noises, and keep an ear open for any other noises. You only need to capture the ambient noise for a few moments; two to five seconds will suffice.

Part 2: How to Remove Background Noise in Audacity on Windows and Mac?

Whether you are using Windows or macOS, we will show you a step-by-step process to achieve your results using both software in this part of Audacity remove background music guide.

Remove background noise in Audacity on Windows

Step 1: On your recording, select a few moments of sound. Any segment of noise that incorporates other noises should be avoided.

Step 2: From the Effect menu, select Noise Reduction.

Step 3: Select the Get Noise Profile option whenever the Noise Reduction effect screen appears.

Note: Choose whether to implement the noise removal to the entire waveforms or only a portion of it.

Step 4: To access the Noise Reduction effects window, go to Effects > Noise Reduction. Raise the level of noise reduction progressively while previewing the result.

Step 5: Head over to the File section to Export and Save the result. Audacity does not save sound clips when you select Save Project; instead, you must choose Export. Select the file type you want to store and the place wherever you can save it. Select Save after giving the File Name.

Remove background noise in Audacity on Mac

Step 1: Create a room tone-containing audio file. When you don’t have a separate track for room tone, use a recording with a few moments of quiet in it. Click-and-drag to select a segment with a few minutes of silence using the Selection Tool.

Step 2: Select Noise Reduction from the Effects tab. Select the Get Noise Profile tab in the new tab under Step 1. The screen will shut, and Audacity will take noise profile samples of the indicated area.

Step 3: Click-and-drag to select the whole file, which requires noise reduction with the Selection Tool. To re-open the function, go to the Effect tab and pick Noise Reduction. Make modifications to the following parameters under Step 2:

• Reduce and Residue
• Frequency Smoothing (bands)
• Sensitivity
• Noise Reduction

Step 4: To listen to how the chosen file will look with the selected parameters, select Preview. Re-adjust until you have a sound noise reduction with no interference. When you’re finished, select Reduce and click OK.

Part 3: Why is Audacity Noise Reduction Not Working?

It’s possible that the Noise Reduction function isn’t letting you mop up your recording since your audio isn’t appropriate for it. The disturbance must be continuous, not random or fluctuating, to work for Audacity’s Noise Reduction function.

For example, the Noise Reduction function will not assist if your audio was made in a busy environment with unique noises such as background chatter, random traffic noises, or in an exhibition space or museum. The Noise Reduction feature in Audacity isn’t meant to cope with that kind of distortion. You’ll need to alter your recording approach if you’re capturing voice in either of those situations.

Under the following situations, the Audacity Noise Reduction function might underperform.

• Particular noise in the background, including traffic or people.
• When the harmonics of the sound and voice are comparable.
• There is sound variance where there is fluctuation in the noise.
• The volume of the voice is comparable to or lower than that of the background noise.
• When the noise is irregular or changeable rather than continuous.
• The loudness is deafening.
• The sound is a single click or pop.

Part 4: How to Prevent Background Noise in Audio Recording?

Although Audacity allows eliminating noise very simply, it is still an additional level that takes time to refine your podcast production. These pointers can help you avoid the necessity for noise reduction and cut down on the amount of time you spend processing.

1. Reduce the Computer Fan Noise

Whenever computers become too heated, they can produce a lot of noise. You may limit the amount of software that runs and position your mic away from the keyboard to help lessen this impact and avoid the fan from coming on.

However, even if you observe all of these guidelines, undesired recording sounds may still appear in your program. Fortunately, contemporary software makes this problem quite simple to resolve.

2. Reduce the Gain and Get Close to the Mic

Reduce the gain (sensitivity of the microphone) and go nearer to it. Talking straight into the microphone won’t distort your audio if you reduce the gain, and that would assist your microphone in concentrating on scooping up your voice’s tone.

Bonus Tip: Set your recorder’s (or DAW’s) sensitivity such that your speech peaks between -12 and -10db.

3. Utilize a Versatile Microphone

Condenser and dynamic microphones are the two most common types of podcast microphones. Condenser microphones are significantly more sensitive instruments meant to take up average atmospheric noise, whereas dynamic microphones have a narrower frequency range, picking up fewer ambient noises.

4. Optimize Your Recording Environment

The most significant and most crucial aspect of your podcasts’ sound quality is where you capture it. To optimize your personal podcasting space, we recommend choosing a peaceful, compact area away from HVAC systems, vehicles, external hard drives, background sound, motors, and other distractions. You may also increase the tone of your room by using natural sound absorbents such as curtains, rugs, carpets, and sofas.

Part 5: How to Remove Background Noise in Filmora?

Although there is a lot of software available to eliminate ambient noise, we highly suggest Wondershare Filmora Video Editor to edit audio and video in one place.

In addition to the standard audio editing capabilities, the recently redesigned Filmora currently includes enhanced waveforms, volume Keyframing , peak metering, and audio transitions, giving you a better audio editing interface.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora Video Editor will quickly remove ambient sound from both sound/video. You may also remove the sound from the video with this simple video editor, use the Audio Equalizer or Audio Mixer functions to modify the audio further, and then Export and save the audio in an Mp3 file. Here are the detailed steps:

Step 1: In the Wondershare Filmora Timeline menu, Import your footage. Trim the footage after previewing it and deleting the sections you don’t want to retain.

Step 2: To eliminate the ambient noise immediately, double-click on the video file, and go to the Audio panel to select the Remove Background Noise option. You will find that the background noise is removed automatically.

Step 3: After checking the results, select Export to download the noise-reduced clip to your desktop or upload it immediately to YouTube or Vimeo.

Conclusion

Well, there you have it. In this Audacity Remove Background Noise guide, we have reviewed every possible method you can adopt to get rid of the unnecessary background noise in the Audacity. And if the desired results are still not achieved, we highly recommend using the Wondershare Filmora editing software. Not only will it help you remove the unwanted ambient noise, but it will also allow you to customize your audio or video file further.

02 How to Remove Background Noise in Audacity?

03 Why is Audacity Noise Reduction Not Working?

04 How to Prevent Background Noise in Audio Recording?

05 How to Remove Background Noise in Filmora?

Part 1: Things You Need to Prepare for Background Noise Reduction

Here are few things that you need to consider before you apply the noise reduction to your clips:

1. Noise Sample

A decent sample of the noise you wish to eliminate is perhaps the most crucial aspect of the Audacity remove noise procedure.

This will be used by Audacity to understand the noise and build a noise profile. The noise recording should last for a fair amount of time and be devoid of any other noises.

2. Avoid Copy Pasting Tiny Noise Section in Your Spoken Phrases

When you have a tiny part of noise between your stated words on your audio, please don’t copy/paste it to make a more significant piece of sound for Audacity to examine.

You would not be supplying Audacity with any more information that will help it generate a decent noise profile. The noise profile is what enables Audacity to tell the difference between speech and noise.

3. Minimum 2048 Data Samples Required

To build a noise profile, the Noise Reduction function requires a minimum of 2048 sample data. An audio file with a sampling frequency of 44.1kHz is roughly five hundredths of a second.

Note that this is the minor sound level that Audacity needs to generate a noise profile; however, should you supply a larger sample of the noise, Audacity can typically perform a great job of producing a suitable noise profile. As a result, attempt to capture a few seconds of background noises wherever possible.

4. Establish Recording Level and Record “Silence”

Setting your audio volume and capturing some “quiet” prior to speaking is the best way to achieve this. Instead, when you’ve finished talking, keep your camera/recorder going for a few moments.

Don’t move or create any sounds while capturing the background noises, and keep an ear open for any other noises. You only need to capture the ambient noise for a few moments; two to five seconds will suffice.

Part 2: How to Remove Background Noise in Audacity on Windows and Mac?

Whether you are using Windows or macOS, we will show you a step-by-step process to achieve your results using both software in this part of Audacity remove background music guide.

Remove background noise in Audacity on Windows

Step 1: On your recording, select a few moments of sound. Any segment of noise that incorporates other noises should be avoided.

Step 2: From the Effect menu, select Noise Reduction.

Step 3: Select the Get Noise Profile option whenever the Noise Reduction effect screen appears.

Note: Choose whether to implement the noise removal to the entire waveforms or only a portion of it.

Step 4: To access the Noise Reduction effects window, go to Effects > Noise Reduction. Raise the level of noise reduction progressively while previewing the result.

Step 5: Head over to the File section to Export and Save the result. Audacity does not save sound clips when you select Save Project; instead, you must choose Export. Select the file type you want to store and the place wherever you can save it. Select Save after giving the File Name.

Remove background noise in Audacity on Mac

Step 1: Create a room tone-containing audio file. When you don’t have a separate track for room tone, use a recording with a few moments of quiet in it. Click-and-drag to select a segment with a few minutes of silence using the Selection Tool.

Step 2: Select Noise Reduction from the Effects tab. Select the Get Noise Profile tab in the new tab under Step 1. The screen will shut, and Audacity will take noise profile samples of the indicated area.

Step 3: Click-and-drag to select the whole file, which requires noise reduction with the Selection Tool. To re-open the function, go to the Effect tab and pick Noise Reduction. Make modifications to the following parameters under Step 2:

• Reduce and Residue
• Frequency Smoothing (bands)
• Sensitivity
• Noise Reduction

Step 4: To listen to how the chosen file will look with the selected parameters, select Preview. Re-adjust until you have a sound noise reduction with no interference. When you’re finished, select Reduce and click OK.

Part 3: Why is Audacity Noise Reduction Not Working?

It’s possible that the Noise Reduction function isn’t letting you mop up your recording since your audio isn’t appropriate for it. The disturbance must be continuous, not random or fluctuating, to work for Audacity’s Noise Reduction function.

For example, the Noise Reduction function will not assist if your audio was made in a busy environment with unique noises such as background chatter, random traffic noises, or in an exhibition space or museum. The Noise Reduction feature in Audacity isn’t meant to cope with that kind of distortion. You’ll need to alter your recording approach if you’re capturing voice in either of those situations.

Under the following situations, the Audacity Noise Reduction function might underperform.

• Particular noise in the background, including traffic or people.
• When the harmonics of the sound and voice are comparable.
• There is sound variance where there is fluctuation in the noise.
• The volume of the voice is comparable to or lower than that of the background noise.
• When the noise is irregular or changeable rather than continuous.
• The loudness is deafening.
• The sound is a single click or pop.

Part 4: How to Prevent Background Noise in Audio Recording?

Although Audacity allows eliminating noise very simply, it is still an additional level that takes time to refine your podcast production. These pointers can help you avoid the necessity for noise reduction and cut down on the amount of time you spend processing.

1. Reduce the Computer Fan Noise

Whenever computers become too heated, they can produce a lot of noise. You may limit the amount of software that runs and position your mic away from the keyboard to help lessen this impact and avoid the fan from coming on.

However, even if you observe all of these guidelines, undesired recording sounds may still appear in your program. Fortunately, contemporary software makes this problem quite simple to resolve.

2. Reduce the Gain and Get Close to the Mic

Reduce the gain (sensitivity of the microphone) and go nearer to it. Talking straight into the microphone won’t distort your audio if you reduce the gain, and that would assist your microphone in concentrating on scooping up your voice’s tone.

Bonus Tip: Set your recorder’s (or DAW’s) sensitivity such that your speech peaks between -12 and -10db.

3. Utilize a Versatile Microphone

Condenser and dynamic microphones are the two most common types of podcast microphones. Condenser microphones are significantly more sensitive instruments meant to take up average atmospheric noise, whereas dynamic microphones have a narrower frequency range, picking up fewer ambient noises.

4. Optimize Your Recording Environment

The most significant and most crucial aspect of your podcasts’ sound quality is where you capture it. To optimize your personal podcasting space, we recommend choosing a peaceful, compact area away from HVAC systems, vehicles, external hard drives, background sound, motors, and other distractions. You may also increase the tone of your room by using natural sound absorbents such as curtains, rugs, carpets, and sofas.

Part 5: How to Remove Background Noise in Filmora?

Although there is a lot of software available to eliminate ambient noise, we highly suggest Wondershare Filmora Video Editor to edit audio and video in one place.

In addition to the standard audio editing capabilities, the recently redesigned Filmora currently includes enhanced waveforms, volume Keyframing , peak metering, and audio transitions, giving you a better audio editing interface.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora Video Editor will quickly remove ambient sound from both sound/video. You may also remove the sound from the video with this simple video editor, use the Audio Equalizer or Audio Mixer functions to modify the audio further, and then Export and save the audio in an Mp3 file. Here are the detailed steps:

Step 1: In the Wondershare Filmora Timeline menu, Import your footage. Trim the footage after previewing it and deleting the sections you don’t want to retain.

Step 2: To eliminate the ambient noise immediately, double-click on the video file, and go to the Audio panel to select the Remove Background Noise option. You will find that the background noise is removed automatically.

Step 3: After checking the results, select Export to download the noise-reduced clip to your desktop or upload it immediately to YouTube or Vimeo.

Conclusion

Well, there you have it. In this Audacity Remove Background Noise guide, we have reviewed every possible method you can adopt to get rid of the unnecessary background noise in the Audacity. And if the desired results are still not achieved, we highly recommend using the Wondershare Filmora editing software. Not only will it help you remove the unwanted ambient noise, but it will also allow you to customize your audio or video file further.

02 How to Remove Background Noise in Audacity?

03 Why is Audacity Noise Reduction Not Working?

04 How to Prevent Background Noise in Audio Recording?

05 How to Remove Background Noise in Filmora?

Part 1: Things You Need to Prepare for Background Noise Reduction

Here are few things that you need to consider before you apply the noise reduction to your clips:

1. Noise Sample

A decent sample of the noise you wish to eliminate is perhaps the most crucial aspect of the Audacity remove noise procedure.

This will be used by Audacity to understand the noise and build a noise profile. The noise recording should last for a fair amount of time and be devoid of any other noises.

2. Avoid Copy Pasting Tiny Noise Section in Your Spoken Phrases

When you have a tiny part of noise between your stated words on your audio, please don’t copy/paste it to make a more significant piece of sound for Audacity to examine.

You would not be supplying Audacity with any more information that will help it generate a decent noise profile. The noise profile is what enables Audacity to tell the difference between speech and noise.

3. Minimum 2048 Data Samples Required

To build a noise profile, the Noise Reduction function requires a minimum of 2048 sample data. An audio file with a sampling frequency of 44.1kHz is roughly five hundredths of a second.

Note that this is the minor sound level that Audacity needs to generate a noise profile; however, should you supply a larger sample of the noise, Audacity can typically perform a great job of producing a suitable noise profile. As a result, attempt to capture a few seconds of background noises wherever possible.

4. Establish Recording Level and Record “Silence”

Setting your audio volume and capturing some “quiet” prior to speaking is the best way to achieve this. Instead, when you’ve finished talking, keep your camera/recorder going for a few moments.

Don’t move or create any sounds while capturing the background noises, and keep an ear open for any other noises. You only need to capture the ambient noise for a few moments; two to five seconds will suffice.

Part 2: How to Remove Background Noise in Audacity on Windows and Mac?

Whether you are using Windows or macOS, we will show you a step-by-step process to achieve your results using both software in this part of Audacity remove background music guide.

Remove background noise in Audacity on Windows

Step 1: On your recording, select a few moments of sound. Any segment of noise that incorporates other noises should be avoided.

Step 2: From the Effect menu, select Noise Reduction.

Step 3: Select the Get Noise Profile option whenever the Noise Reduction effect screen appears.

Note: Choose whether to implement the noise removal to the entire waveforms or only a portion of it.

Step 4: To access the Noise Reduction effects window, go to Effects > Noise Reduction. Raise the level of noise reduction progressively while previewing the result.

Step 5: Head over to the File section to Export and Save the result. Audacity does not save sound clips when you select Save Project; instead, you must choose Export. Select the file type you want to store and the place wherever you can save it. Select Save after giving the File Name.

Remove background noise in Audacity on Mac

Step 1: Create a room tone-containing audio file. When you don’t have a separate track for room tone, use a recording with a few moments of quiet in it. Click-and-drag to select a segment with a few minutes of silence using the Selection Tool.

Step 2: Select Noise Reduction from the Effects tab. Select the Get Noise Profile tab in the new tab under Step 1. The screen will shut, and Audacity will take noise profile samples of the indicated area.

Step 3: Click-and-drag to select the whole file, which requires noise reduction with the Selection Tool. To re-open the function, go to the Effect tab and pick Noise Reduction. Make modifications to the following parameters under Step 2:

• Reduce and Residue
• Frequency Smoothing (bands)
• Sensitivity
• Noise Reduction

Step 4: To listen to how the chosen file will look with the selected parameters, select Preview. Re-adjust until you have a sound noise reduction with no interference. When you’re finished, select Reduce and click OK.

Part 3: Why is Audacity Noise Reduction Not Working?

It’s possible that the Noise Reduction function isn’t letting you mop up your recording since your audio isn’t appropriate for it. The disturbance must be continuous, not random or fluctuating, to work for Audacity’s Noise Reduction function.

For example, the Noise Reduction function will not assist if your audio was made in a busy environment with unique noises such as background chatter, random traffic noises, or in an exhibition space or museum. The Noise Reduction feature in Audacity isn’t meant to cope with that kind of distortion. You’ll need to alter your recording approach if you’re capturing voice in either of those situations.

Under the following situations, the Audacity Noise Reduction function might underperform.

• Particular noise in the background, including traffic or people.
• When the harmonics of the sound and voice are comparable.
• There is sound variance where there is fluctuation in the noise.
• The volume of the voice is comparable to or lower than that of the background noise.
• When the noise is irregular or changeable rather than continuous.
• The loudness is deafening.
• The sound is a single click or pop.

Part 4: How to Prevent Background Noise in Audio Recording?

Although Audacity allows eliminating noise very simply, it is still an additional level that takes time to refine your podcast production. These pointers can help you avoid the necessity for noise reduction and cut down on the amount of time you spend processing.

1. Reduce the Computer Fan Noise

Whenever computers become too heated, they can produce a lot of noise. You may limit the amount of software that runs and position your mic away from the keyboard to help lessen this impact and avoid the fan from coming on.

However, even if you observe all of these guidelines, undesired recording sounds may still appear in your program. Fortunately, contemporary software makes this problem quite simple to resolve.

2. Reduce the Gain and Get Close to the Mic

Reduce the gain (sensitivity of the microphone) and go nearer to it. Talking straight into the microphone won’t distort your audio if you reduce the gain, and that would assist your microphone in concentrating on scooping up your voice’s tone.

Bonus Tip: Set your recorder’s (or DAW’s) sensitivity such that your speech peaks between -12 and -10db.

3. Utilize a Versatile Microphone

Condenser and dynamic microphones are the two most common types of podcast microphones. Condenser microphones are significantly more sensitive instruments meant to take up average atmospheric noise, whereas dynamic microphones have a narrower frequency range, picking up fewer ambient noises.

4. Optimize Your Recording Environment

The most significant and most crucial aspect of your podcasts’ sound quality is where you capture it. To optimize your personal podcasting space, we recommend choosing a peaceful, compact area away from HVAC systems, vehicles, external hard drives, background sound, motors, and other distractions. You may also increase the tone of your room by using natural sound absorbents such as curtains, rugs, carpets, and sofas.

Part 5: How to Remove Background Noise in Filmora?

Although there is a lot of software available to eliminate ambient noise, we highly suggest Wondershare Filmora Video Editor to edit audio and video in one place.

In addition to the standard audio editing capabilities, the recently redesigned Filmora currently includes enhanced waveforms, volume Keyframing , peak metering, and audio transitions, giving you a better audio editing interface.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora Video Editor will quickly remove ambient sound from both sound/video. You may also remove the sound from the video with this simple video editor, use the Audio Equalizer or Audio Mixer functions to modify the audio further, and then Export and save the audio in an Mp3 file. Here are the detailed steps:

Step 1: In the Wondershare Filmora Timeline menu, Import your footage. Trim the footage after previewing it and deleting the sections you don’t want to retain.

Step 2: To eliminate the ambient noise immediately, double-click on the video file, and go to the Audio panel to select the Remove Background Noise option. You will find that the background noise is removed automatically.

Step 3: After checking the results, select Export to download the noise-reduced clip to your desktop or upload it immediately to YouTube or Vimeo.

Conclusion

Well, there you have it. In this Audacity Remove Background Noise guide, we have reviewed every possible method you can adopt to get rid of the unnecessary background noise in the Audacity. And if the desired results are still not achieved, we highly recommend using the Wondershare Filmora editing software. Not only will it help you remove the unwanted ambient noise, but it will also allow you to customize your audio or video file further.

Making a Trendy Jujutsu Kaisen TikTok Video

How to Make Jujutsu Kaisen Tiktok Video?

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever watched Jujutsu Kaisen? It is a Japanese manga series that got a lot of fame recently. A massive fan of anime might recognize the anime series for its intriguing fight sequences. Recently we have seen a huge trend of Jujutsu Kaisen videos on TikTok where she says “Anime is Trash,” and suddenly the scene turns into an anime fight scene. Technically, this is the filming term “jump cut.” You would likely want to create your own of these videos after watching them.

If you are one of the Jujutsu Kaisen fans and looking to create your TikTok montage, then you just landed on the right page. You can easily make such videos by using a video editor like Filmora X. In this article, we will walk through the steps involved in creating Jujutsu Kaisen TikTok montage videos. Now you can create your own scenes and connect them with Jutusu Kaisen fight scenes. Trust me, this is so much fun while editing it.

Step By Step Guide For Creating Jujutsu Kaisen TikTok Videos

It requires two things to produce such videos. First, you need an idea for making the first part of the video, where you are engaged in some type of activity, or the video involves some kind of interaction with others. Second, you need a clip from the anime that goes along with the first part of the video and justifies the action you perform in the first part of the video. You can create these videos in three simple steps.

---

---

Step1: Download The Anime Clip From the Internet

The first thing you need is the anime footage that you want to use in your video. There are plenty of scenes that you can create, but you have to choose wisely. You can search on the internet, and you will find plenty of websites from where you can download these anime videos. The best exercise for selecting the video clip is, keep watching videos and if you find something interesting, download that clip.

Step2: Shoot Your Own Clip

Once you have selected a clip from the anime series, you have to make your own video that matches the scene you selected from the anime video. If there are two characters in anime, then you may also need two characters to make your own video. In TikTok videos, you may have seen two characters with a girl saying “Anime is trash” and a boy punching her, and then abruptly, the scene changes to Jujutsu Kaisen fight scene.

The punching scene is just an example, but you can come up with your own creative scenes that you can connect with anime clips and make interesting videos. Make sure to keep some points in your mind when shooting video,

• Keep the camera stable and make sure there are no shakes in your video. You can use a tripod for this purpose or fix your camera somewhere to keep it stable. Avoid recording video by holding the camera in your hand.
• The video angle should be correct, and it should be according to the anime footage. For example, if the punching person is on the right side of anime footage, you should follow the same sequence.
• It is recommended that the video be shot in sufficient natural light, but artificial lights may also be used.
• It is crucial to use a high-quality camera when making videos. You can do this with a smartphone or camera, and you should make sure you are filming in 1080p. Low-quality video will not perform well.

Step3: Edit and Connect both Clips

Once you have both video clips, the next step is editing the video and joining them to create a fantastic scene. For this purpose, we will use the Filmora X video editing software, which is both easy to use and one of the best video editing programs. To edit your videos, follow the steps given below:

1. Download Filmora X video editor from their official website, install it on your computer if it is already installed, and then run the program to start video editing.
2. Go to file, and click on import media and then click on import media files.
3. Now select both clips and import them to Filmora X.
4. Drag and drop your own video and bring it to the first track. Then drag and drop the anime video and place it next to your video in the track.
5. You may need to make some adjustments to both video clips so that the scenes perfectly match each other. The most important step in creating videos matches the sound where a person says, “Anime is trash,” and then the action happens.
6. Play the video to make sure everything is in position. If you feel that it still requires adjusting, then go back to the previous step and make the needed adjustments.
7. Music is critical to match to make the video looks smooth. Find your music to make them fit perfectly. For example, matching the hard beat with the punch or turning up the volume when the anime shows would be good ideas.
8. Once everything is perfectly aligned, your video is ready, and now you need to export it.
9. Click on the export button and select the desired video format from the list, i.e. (MP4, Gif, WMV, FLV, etc.).
10. Once you have selected the desired format, click on export, and the video will take some time to render. Once rendered, you can now share the video with your friends and wow them.

Conclusion: These are some simple steps using which you can create your own Jujutsu Kaisen TikTok Montage. Now it’s up to you to create new ideas and make interesting videos. We recommend using the Filmora X video editor because it is easy to use and can do wonders for you. Even if you don’t have any prior experience in video editing, you can follow these steps and create amazing videos. It may take some time, but you will get better eventually.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever watched Jujutsu Kaisen? It is a Japanese manga series that got a lot of fame recently. A massive fan of anime might recognize the anime series for its intriguing fight sequences. Recently we have seen a huge trend of Jujutsu Kaisen videos on TikTok where she says “Anime is Trash,” and suddenly the scene turns into an anime fight scene. Technically, this is the filming term “jump cut.” You would likely want to create your own of these videos after watching them.

If you are one of the Jujutsu Kaisen fans and looking to create your TikTok montage, then you just landed on the right page. You can easily make such videos by using a video editor like Filmora X. In this article, we will walk through the steps involved in creating Jujutsu Kaisen TikTok montage videos. Now you can create your own scenes and connect them with Jutusu Kaisen fight scenes. Trust me, this is so much fun while editing it.

Step By Step Guide For Creating Jujutsu Kaisen TikTok Videos

It requires two things to produce such videos. First, you need an idea for making the first part of the video, where you are engaged in some type of activity, or the video involves some kind of interaction with others. Second, you need a clip from the anime that goes along with the first part of the video and justifies the action you perform in the first part of the video. You can create these videos in three simple steps.

---

---

Step1: Download The Anime Clip From the Internet

The first thing you need is the anime footage that you want to use in your video. There are plenty of scenes that you can create, but you have to choose wisely. You can search on the internet, and you will find plenty of websites from where you can download these anime videos. The best exercise for selecting the video clip is, keep watching videos and if you find something interesting, download that clip.

Step2: Shoot Your Own Clip

Once you have selected a clip from the anime series, you have to make your own video that matches the scene you selected from the anime video. If there are two characters in anime, then you may also need two characters to make your own video. In TikTok videos, you may have seen two characters with a girl saying “Anime is trash” and a boy punching her, and then abruptly, the scene changes to Jujutsu Kaisen fight scene.

The punching scene is just an example, but you can come up with your own creative scenes that you can connect with anime clips and make interesting videos. Make sure to keep some points in your mind when shooting video,

• Keep the camera stable and make sure there are no shakes in your video. You can use a tripod for this purpose or fix your camera somewhere to keep it stable. Avoid recording video by holding the camera in your hand.
• The video angle should be correct, and it should be according to the anime footage. For example, if the punching person is on the right side of anime footage, you should follow the same sequence.
• It is recommended that the video be shot in sufficient natural light, but artificial lights may also be used.
• It is crucial to use a high-quality camera when making videos. You can do this with a smartphone or camera, and you should make sure you are filming in 1080p. Low-quality video will not perform well.

Step3: Edit and Connect both Clips

Once you have both video clips, the next step is editing the video and joining them to create a fantastic scene. For this purpose, we will use the Filmora X video editing software, which is both easy to use and one of the best video editing programs. To edit your videos, follow the steps given below:

1. Download Filmora X video editor from their official website, install it on your computer if it is already installed, and then run the program to start video editing.
2. Go to file, and click on import media and then click on import media files.
3. Now select both clips and import them to Filmora X.
4. Drag and drop your own video and bring it to the first track. Then drag and drop the anime video and place it next to your video in the track.
5. You may need to make some adjustments to both video clips so that the scenes perfectly match each other. The most important step in creating videos matches the sound where a person says, “Anime is trash,” and then the action happens.
6. Play the video to make sure everything is in position. If you feel that it still requires adjusting, then go back to the previous step and make the needed adjustments.
7. Music is critical to match to make the video looks smooth. Find your music to make them fit perfectly. For example, matching the hard beat with the punch or turning up the volume when the anime shows would be good ideas.
8. Once everything is perfectly aligned, your video is ready, and now you need to export it.
9. Click on the export button and select the desired video format from the list, i.e. (MP4, Gif, WMV, FLV, etc.).
10. Once you have selected the desired format, click on export, and the video will take some time to render. Once rendered, you can now share the video with your friends and wow them.

Conclusion: These are some simple steps using which you can create your own Jujutsu Kaisen TikTok Montage. Now it’s up to you to create new ideas and make interesting videos. We recommend using the Filmora X video editor because it is easy to use and can do wonders for you. Even if you don’t have any prior experience in video editing, you can follow these steps and create amazing videos. It may take some time, but you will get better eventually.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Also read: